GLASS BONDING
Glass is used in many areas of our lives. But when glass breaks, it can be a challenge to repair it.
Special glass adhesives, primers and UV adhesives are suitable for bonding glass. This is where BLUFIXX SMART REPAIR for metal, glass and stone comes into play. An innovative solution to bond glass effectively and permanently.
Challenges when bonding glass
Bonding glass requires a great deal of precision and the right material. This is because glass has a smooth and often transparent surface.
Typical problems when bonding glass:
- Difficulty in achieving a strong and invisible bond
- Risk of the adhesive becoming visible and impairing the appearance
Expert tip:
We only advise you to use suitable adhesives for glass. Otherwise you are taking an unnecessary risk in terms of durability. When using the adhesive, you should always ensure that it is applied evenly to prevent bubbles from forming.
Repairing glass: Which adhesive sticks to glass?
Glue glass to glass, transparent and clean, or glue another material such as metal to glass. Thanks to the large selection of adhesives, both are possible quickly and easily:
Superglues
- are manufactured on the basis of cyanoacrylate
- are heat-resistant after curing
- are ideal for repairing bowls, vases and other items that are cleaned in the dishwasher
- are barely visible when dry
- not ideal for filling cracks and small holes
Silicone adhesives
- are waterproof and heat-resistant, making them ideal for use in the bathroom or when building aquariums
- are gap-filling and are therefore also suitable for bonding surfaces that are not completely smooth with cracks or holes
- however, take longer to cure
Epoxy resin adhesive
- 2-component adhesives based on epoxy resin
- offer extreme adhesion and are gap-filling
- must be mixed with a hardener before use, which results in very fast and firm curing
- due to their harmful substances, good ventilation should be ensured
UV adhesive
- Ideal for bonding glass to glass as they are almost invisible after curing
- react to UV radiation and are therefore waterproof and heat-resistant
- however, at least one of the elements to be bonded must be translucent so that the UV radiation can activate the curing process
All these adhesives have their specific advantages, but BLUFIXX SMART REPAIR offers a comprehensive and innovative solution. It combines the best properties of the adhesives mentioned with additional flexibility and user-friendliness.
BLUFIXX SMART REPAIR for metal, glass and stone: The ideal solution
BLUFIXX SMART REPAIR is not just an adhesive. The innovative repair kit has been specially developed for difficult materials such as glass.
Properties of BLUFIXX:
- Transparent result
- Strong bonding power
- Simple application
Technical term: “Bonding strength” refers to the ability of the adhesive to permanently bond two surfaces together.
Note:
BLUFIXX SMART REPAIR offers a strong and aesthetically pleasing solution for bonding glass.
Step-by-step instructions for BLUFIXX SMART REPAIR
Bonding glass with BLUFIXX SMART REPAIR is very easy. However, the process should be carried out with care.
This is how it works:
Step 1: Preparation of the glass pieces to be bonded
- Clean the breakage points thoroughly.
- Make sure that the pieces are dry and dust-free.
Step 2: Application of the BLUFIXX set
- Apply a thin layer of BLUFIXX gel to one of the breakage points.
- Carefully join the parts together.
- Use the enclosed UV light to cure the gel.
Tips for an optimal result
- Avoid air bubbles when applying the gel.
- Remove excess gel with the UV lamp before curing.
- To ensure optimum bonding, apply light pressure to the bonded parts for a few seconds.
Note:
Careful preparation and application are crucial for a successful repair with BLUFIXX SMART REPAIR. Ideally, the result will look as if you had applied glass on glass.
What our customers say
Numerous customers have already successfully used BLUFIXX SMART REPAIR to repair their glass items. The positive testimonials confirm the effectiveness and user-friendliness of BLUFIXX SMART REPAIR when repairing glass.
BLUFIXX compared to other bonding methods
BLUFIXX SMART REPAIR outperforms other conventional bonding methods, particularly in terms of durability, aesthetics and ease of use.
Advantages of BLUFIXX SMART REPAIR:
- Strong and durable bond
- Easy and clean application
- Aesthetically pleasing, transparent result
Note:
BLUFIXX SMART REPAIR supports an environmentally friendly and sustainable approach to glass repair. It extends the service life of glass items and thus reduces the need to buy new ones.
Order now and start the repair immediately!
Bonding glass is simple and effective with BLUFIXX. Use BLUFIXX SMART REPAIR to fill cracks or damage or add missing parts on almost all surfaces and materials. This also includes stone, metal and plastic. Thanks to our innovative light-curing technology, you can repair your everyday objects in just a few seconds.
Discover our wide range of products now and let us convince you of their effectiveness!
FAQ
Can BLUFIXX be used for bonding broken glass?
BLUFIXX is ideal for bonding broken glass and other glass repairs.
Can BLUFIXX be used for all types of glass?
BLUFIXX is suitable for most types of glass.
How long does the gel have to harden?
The gel hardens under UV light within a few seconds.
Is the result of the repair with BLUFIXX visible?
BLUFIXX dries transparent and is barely visible after curing.
Is BLUFIXX waterproof?
After curing, BLUFIXX is waterproof and resistant to all everyday influences.
Get in contact with us
Do you have a question about one of our services or would you like to contact us in general? Please use the following form.
Contact us
Do you have any questions about BLUFIXX products or your order?
We will be happy to help you at the following e-mail address:
info(at)multipac.de
All fields in the contact form are mandatory.