Wooden tables are not only stylish pieces of furniture, they are also subjected to heavy wear and tear in everyday life. It is therefore not unusual for them to develop dents and dings over time.
These are often caused by falling objects, carelessness when moving or normal wear and tear. Damage can lead to visible blemishes in the short term and structural weaknesses in the long term. In this blog post, you will learn how to repair defects in wood.

MATERIALS AND TOOLS REQUIRED

Certain materials and tools are required to repair wood defects. These include wood filler, sandpaper in various grit sizes, varnish and brushes.
The BLUFIXX-Pro set for wood is particularly helpful. It is easy to use and delivers precise results. Small spatulas or toothpicks are also helpful for the exact dosage and placement of the repair gel.
Other useful tools are cleaning cloths and, if necessary, an iron. Wood care products such as furniture oil or wax ensure that the repaired area is optimally protected again.

PREPARING THE WOODEN TABLE

Before starting the repair, the affected surface should be thoroughly cleaned. Dirt, dust and oil stains must be removed to ensure optimum adhesion of the materials. Special wood cleaners or a mild detergent are suitable for this purpose. When cleaning, care should be taken to ensure that the surface is completely dry.
Protective measures, such as covering surrounding areas, prevent additional soiling. A protected working environment is also important to avoid accidental damage during the repair process. Wearing gloves can also help to keep fingerprints and skin oils away from the area to be repaired.

METHODS FOR REPAIRING DENTS AND DINGS

Fine scratches
Fine scratches can often be repaired with simple household remedies such as walnut kernels or a mixture of vinegar and oil. The natural oils and acids in these substances can swell the scratches and even them out visually.

Wood retouching pencils can also be used to conceal superficial damage. Such pencils are available in different colours and are easy to apply to make scratches almost invisible.

Deeper scratches and dents
Wood filler can be used to remove deeper scratches and dents from the wood. This is filled into the scratch and sanded smooth after drying.
The BLUFIXX-Pro set for wood can also be used here. It is cured with the help of LED light and enables an invisible repair. The gel remains liquid until it hardens so that it can be perfectly modelled.

The iron-out trick
In untreated or oiled wood, dents and dings can be removed with an iron and a cotton cloth. To do this, pour a little water into the dent and leave it to work for a few minutes.
Then place the moistened cloth on the damaged area and moisten and heat with the iron. This causes the wood fibres to swell again, the surface is smoothed and the dent is removed.

CARE INSTRUCTIONS FOR A LONG SERVICE LIFE

Regular cleaning and care are essential to prolong the life of a wooden table, for example one made of lacquered wood. The use of coasters and tablecloths protects the surface from heat and moisture. Gentle cleaning also helps to ensure that the wood is not damaged.
Furniture polish and wood care products help to keep the surfaces fresh and protect them against everyday wear and tear. Care products should be selected that are specifically suitable for the type of wood in question. This is the only way to prevent damage to the wood.
It is also advisable to check the wooden table regularly for damage. If such affected areas occur, they should be repaired immediately to prevent major problems.

DIY vs. professional repair

DIY repairs have the advantage of being cost-effective and flexible. They are often sufficient for minor damage and offer a good opportunity to extend the life of the wooden table. For larger or more complicated damage, however, it may make sense to call in a specialist. They can achieve professional results that are durable in the long term.

A cost comparison shows that DIY methods are cheaper, but professional repairs can offer greater durability and quality. In addition, professionals often have specialised knowledge and tools that are necessary for particularly stubborn or extensive damage.

FAQ